Supply moisture meter and sound level meter,etc.

More info:

Shore Hardness Meter

 

 

Shore hardness meter is used to measure surface of hardness of hard rubber,plastic and other similar character materials. The shore hardness meter is digital reading,powered by battery.With compact size, the hardness meter is easy to hold and operate.

The shore hardness meter can meet the standard of DIN53505, ASTMD2240, ISO7619, JISK7215.

 

6510AShore Hardness Meter is used to measure hardness of soft plastic,rubber,synthetic rubber,blanket, leather and printing rollers

6510D Shore Hardness Meter can be used to test hardness of hard plastic and hard rubber,such as thermoplastic, hard resin, floor materials, bowling etc.The hardness meter is specially for hardness test of rubber and plastic finished product.

 

6510C Shore Hardness Meter is designed to test hearness of foam and sponge and other similar soft material.

 

6510F Shore Hardness Meter is specially designed to test cellular materials.Cylindrical indentor configuration and larde diameter presser foot probe ensure a direct measure.

 

 6510AShore Hardness Meter
                                      6510D Shore Hardness Meter

 

Specification

Can display hardness value average hardness value and Maximum hardness value
Accuracy:<1%H
Resolution:0.1
Measurement range:0-100HA(HD)
Operation temperature:0 to 40 Deg.C
Operation Humidity:10-90%RH
Communication port: RS232C port
Auto Power Switch Off
Power supply: 4×1.5V AAA(UM-4) Battery
Battery power alarm: low battery indication
Dimension:162×65×38mm
Weight: 173g(without probe)

---

6510C Shore Hardness Meter

 

Specification

Can display hardness value average hardness value and Maximum hardness value
Accuracy:<1%H
Resolution:0.1
Measurement range:0-100HC
Operation temperature:0 to 40 Deg.C
Operation Humidity:10-90%RH
Communication port: RS232C port
Auto Power Switch Off
Power supply: 4×1.5V AAA(UM-4) Battery
Battery power alarm: low battery indication
Dimension:162×65×38mm
Weight: 173g(without probe)

---

 

6510F Shore Hardness Meter

 

Specification
Range: 0~100
Resolution:  0.1
Auuracy:<=+/-1
Display: 10 mm LCD,4 digits
Presser foot probe: 80mm diameter
Indenter: Extension 2.54mm,  25.2mm Cylinder
Spring force: 455gf
Power supply: 4x1.5v AA (UM-3) battery
Operating Temp. 0 to 50 Deg.C
Operating  Humidity <80%RH     
Size: 162x65x28mm (6.4x2.6x1.1inch)
Weight: about  490g (without battery)
Communication interface: RS232C interface
Power off :  2 modes. One is off by press power key until OFF indicated on LCD screen; The other is auto power off after 2 minutes without any operation